Results 1 to 7 of 7

Thread: Common atomizer thread sizes-

  1. #1
    Join Date
    Jun 2009
    Location
    The Great State of Minnesota!
    Posts
    409

    Default Common atomizer thread sizes-

    Some Useful info for modders-

    Thread size off the top of my head-

    801- M9 x .75

    901- M8 x .75

    510- M7 x .5

    401- M7 x .5

    David

  2. #2
    Join Date
    Jun 2009
    Location
    NC
    Posts
    271

    Default

    On the above, the M401 and 510 are the same thread pitch, but they are reversed - the 510 battery end is female, and the 401/2/3/EVO/Pilot battery end is male.

    M201 is same thread pitch as 801 (but has holes in the battery threads)

  3. #3
    Join Date
    Jun 2009
    Location
    State of Denial
    Posts
    749

    Default

    Good info Fuel...

    also dse901 and the dse10x series (101,102,103) have the same thread but reversed, the dse10x series attys thread deeper into the battery than the 901 but the threads are a match.


    Cisco...

  4. #4
    Join Date
    Jul 2009
    Location
    Pinellas County Florida
    Posts
    34

    Default

    Quote Originally Posted by Cisco View Post
    Good info Fuel...

    also dse901 and the dse10x series (101,102,103) have the same thread but reversed, the dse10x series attys thread deeper into the battery than the 901 but the threads are a match.


    Cisco...
    Yes i have used the 103 battery charger connector for a 901 mod. The chargers are cheaper to buy than the batteries.

  5. #5
    Join Date
    Jun 2009
    Posts
    1,491

    Default

    Quote Originally Posted by forcedfuel50 View Post
    Some Useful info for modders-

    Thread size off the top of my head-

    801- M9 x .75

    901- M8 x .75

    510- M7 x .5

    401- M7 x .5

    David
    It would be very useful for beginner modders if someone could update with what parts have these same threads.

    IE:
    901- M8 x .75 => Radio Shack Part # 274-1583



    “Be who you are and say what you feel because those who mind don't matter and those who matter don't mind.” ~Dr. Seuss

    Closed Caption YouTube: Mamacat> I have two French and the better it is

  6. #6
    Join Date
    Jun 2009
    Location
    MN,USA
    Posts
    293

    Default

    So could I use an old 401 atomizer's connector as a 510 battery connector for a mod?
    In other words would a 510 atomizer screw into a 410 atomizer? I'm sure I read something about this but I can't remember where. It would be cheaper to sacrifice a 401 atty than a 510 battery. Or am I way off base here?

  7. #7
    Join Date
    Jun 2009
    Location
    UK
    Posts
    1,210

    Default

    So could I use an old 401 atomizer's connector as a 510 battery connector for a mod?
    yes you can , it has been done ..somewhere...thread match and electrical contact match.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •